English
Bioquell BQ-50
Use Ecolab’s Bioquell BQ-50, a hydrogen peroxide vapour bio-decontamination system in patient rooms and hospital-wide. The Bioquell BQ-50 uses hydrogen vapour to produce a 6-log sporicidal kill on exposed surfaces.
Bioquell technology helps you reduce the bioburden in your hospital, and put your organisation’s infection-prevention goals within reach.
Features of Bioquell BQ-50
- Aeration Units
Position these three lightweight aeration units in the room to create a dynamic airflow, and help distribute the vapour during a cycle. After the bio-decontamination part of the cycle is complete, the aeration units quickly break down the hydrogen peroxide vapour into water vapour and oxygen, leaving no residue or harsh odors behind. - Lectern
Placed outside the patient room, the lectern communicates wirelessly with the vaporizer and aeration units. The simple three-button control panel makes it easy to start a cycle. - Vaporizer
Fast, automated and lightweight, the vaporizer disperses the hydrogen peroxide vapour onto all exposed surfaces.
Why Choose Bioquell BQ-50
Adaptable
Easily transport the lightweight system around your facility. Simple, rapid setup in any area.
Effective
Hydrogen peroxide vapour achieves a 6-log sporicidal kill on surfaces within an enclosed area.
Efficient
Rooms are ready for use immediately post-cycle. There is no need for any further steps such as an additional wipe down to remove residue.
Training
Bioquell specialists will train your staff on-site, with refresher courses if needed. Your staff will learn to run a cycle with verification methods, and review important safety factors.
Use Bioquell Hydrogen Peroxide Vapour Technology in Many Areas of Your Hospital
Use the Bioquell BQ-50 to bio-decontaminate:
Operating rooms, where surgical patients are vulnerable to infection.
Critical care units, which have immunocompromised patients.
Specialized units including burn, transplant, NICU and endoscopy.
Wondering if the Bioquell BQ-50 is right for your organisation? Contact us.
Related Products
Bioquell HPV-AQ
This 35% aqueous hydrogen peroxide solution is used to produce hydrogen peroxide vapour. This vapour achieves a 6-log sporicidal kill on exposed surfaces.
Biological Indicators (BIs)
Our biological indicators are made from Geobacillus stearothermophilus endospores to help you validate a Bioquell bio-decontamination cycle.
Bioquell Room Chemical Indicators (CIs)
Confirm that a Bioquell cycle has achieved the expected vapour distribution and exposure performance with these easy-to-read chemical indicators. A chemical strip reacts to a Bioquell cycle and changes colour to correlate with the cycle’s expected efficacy. For use in rooms and enclosed areas 10m3 and larger.
Use Even on Sensitive Electronics and Equipment
Our hydrogen peroxide vapour is tough on microbial surface contaminants, but gentle on electronics and equipment. Unlike spray-and-wipe methods, there are no additional steps to remove residue. When you need to bio-decontaminate spaces that contain hard-to-clean equipment, Bioquell is ideal. Before using Bioquell on your electronic equipment, check with the manufacturers to confirm compatibility.
Request a Quote
Are you interested in the Bioquell BQ-50 to help decontaminate your hospital or clinic? Use this form to request a quote for the Bioquell BQ-50, and we’ll be in touch soon.